Double Side Spot Welding Machine For Cylindrical Battery
Pack/Electric Bike Battery/E-Vehicles Battery Pack
Product Description
MD-ADW power battery spot welding machine adopts XY axis full servo drive,
ball screw transmission
Move to ensure the accuracy of solder joints. It can be equipped
with MIYACHI series spot welding power supply to ensure the
reliability of welding.
MD-ADW power battery spot welding machine comes with circulating water
welding head cooling system to improve welding
The effect is extended to extend the life of the soldering pin.
Product Features
12. The device comes with a fault alarm and clears the fault
according to the prompt.13. The device can store up to 99 sets of
programming data, which is convenient for production.
14. Production process:
14.1 Set and save the spot welding parameters on the touch screen
according to the number of groups (0-99 group data).
Automatically recall when changing models, press reset button,
reset and enter standby state
14.2 Put the nickel sheet into the upper mold
14.3 Put the battery core into the lower mold as required
14.4 Put the mold into the welder
14.5 Press the start button to automatically exit after spot
welding is completed.
- Quick speed spot welding(2-10ms)
- Low temperature welding spot
- Real time monitoring welding
- With welding completion signal,save welding time
- Can be set spot welding specification welding(Positive and negative
are welded using different currents)
- Can be set the same battery positive spot welding, and negative
does not spot welding
- The current is too small or abnormal during spot welding, the
machine automatically alarms and stops
1.12 Welding effect: good welding consistency, uniform solder
joints and beautiful
1.13 Three kinds of spot welding data input:
- Dot matrix input method
- Array input method
- Disk import method,store spot welding data to U disk,import
directly to the machine,(U disk CAD DXF data is imported into the
touch screen by a single-pass, then can be exported from the touch
screen in batches to the U disk, and then imported into other
machines for using)
1.14 Welding mold name:Chinese and English Input Skill
1.15 Control component: 7 - inch touch screen, 6-axis high speed
PLC programmer, 3-axis 750W servo motor, 2-axis 400W servo motor
drive electric welding head
1.16 Uses forming nickel strip to reduce waste
1.17 Equipment debugging is simple, easy to learn and easy to
understand, change the model quickly (0-199 group data can be
called)
1.18 Welding head power: Electrical servo
1.19 Finished battery fixture mold: 1 set insulation electric wood
fixture(2 pcs)
1.20 Warranty: one year limited warranty and lifetime support
1.21 The device comes with a fault alarm,clear the fault according
to the prompt
1.22 Dimension:L1100*W900*H1930MM
1.23 Weight:about 350KG
Product Advantages
1. Welding stroke can be customized
2. Suitable for various kinds of battery pack
3. High speed welding
4. 7-inch touch screen, more convenient operation, clearer display
5. Welding head has air-cooling or water-cooling function, which
can effectively reduce the influence of spot welding needle
temperature on welding quality.
6. Can store up to 99 groups of files, the file issimple to call,
does not require complicated line changing process
7. One-key calibration function for total shift ofsolder joints,
which can be calibrated for spot shift caused by changing the
solder pin or other reasons
8. Electric or pneumatic spot welding machine is optional
Product Specification
SPECIFICATIONS FOR MD-ASW AND MD-ADW |
| MD-ASW | MD-ADW |
Welding Head Number | 1 | 2 |
Travel | X: 400mm; Y: 400mm | Y: 500mm; Z: 350mm |
Welding Spped | 0.5s/spot, 2000-2500pcs/h | 0.5s/spot, 3500-4000pcs/h |
Welder Power Suppler | 5000A Inverter Spot Welder |
Max Motor Speed | 1000mm/s |
Max Battery Number | 450 pcs (18650) |
Operate System | Embedded system |
User Interface | Touch screen |
Drive Mode | Step motor and precision guide rail |
Power Supply | 220V/50Hz(machine); 3 phase, 380V/50Hz(Welder) |
Air Pressure | 0.3-0.6 MPa |
Machine Size | 900L*900W*1750Hmm | 1100L*900W*1930Hmm |
Machine Weight | 200kg | 350kg |
Product Application
MD-ADW can be used in electric tool battery, torsion car battery,
Energy Storage Battery Pack, Scooter Electric Vehicle Battery, etc.
Compared with manual spot welding, the efficiency and accuracy of
welding have been greatly improved.
Product Operation
1. Setting the parameters of welding on the touch screen. (The same
product only need to be set once)
2. Put the fixture with the battery pack on the quick clamping
position.
3. Press the start button, the machine automatically complete all
welding actions.
4. The welder sound to prompt operator replacement of new fixture
(battery pack).
Double side spot welder details
Cylindrical battery pack welding samples
