Single Sided Spot Welding Machine For Lithium Battery
Battery Spot Welding Machine Description
MD-ASW is used for 18650, 26650, 32650 cylinder battery pack automatic
spot welding, it can weld both side together with high efficiency.
Battery Spot Welding Machine Features
1.Version:0.9 StartHTML:0000000105 EndHTML:0000003358
StartFragment:0000000141 EndFragment:0000003318This full-automatic
machine isdesignated for welding in a consistent direction. Its
double-sided simultaneous welding
design improves the work efficiency without the necessity to make
sacrifice on the performance.
2.Max. compatible battery pack dimension: 600 x 400mm, with height
between 60-70mm.
3.Automatic Needle Compensation: left and right sides consist of 4
detection switches, 8 in total, to detect the positions
and control the needles. Needle repair ;Needle grinding alarm;
Staggered Welding Function
4.Electromagnet device, battery pack detector, cylinder compression
device, and service control system, etc, are installed
Battery Spot Welding Machine Application
1. Battery industry: battery caps, battery nickel sheets, battery tabs, battery
lead-out pieces, button battery welding. It is used for welding of
polar plates, negative pins and busbars of various batteries
(Ni-MH, Ni-Cd, Li-ion batteries).
2. Automobile and motorcycle accessories, hardware industry: suitable for various terminals and wire harness welding, enameled
wire welding, terminal and copper sheet, nickel sheet welding,
automobile connection wire and other precision wire harness
welding, micro-motor motor lead wire welding.
3. Electronics and electrical components industry: silver contacts on various switches, lead wires and gold-sprayed
surfaces, between electronic pins, between soft wires and soft
wires, copper wires and resistor pins, capacitor pins, LED lights
Welding of electronic pins such as pins, socket pins, plugs, etc.
Battery Spot Welding Machine Specification
| Model No. | MD-ASW |
| Y-axis travel | 500mm (customizable) |
| X-axis travel | 350mm (customizable) |
| Max spot welding speed | 0.35s/point (1 hour:about 2800 units18650 cells) |
| Motor drive speed | 1000mm/S |
| Max load electric cores | X direction: 26; Y direction: 26 |
| Capable file group storage | 99 groups |
| Operating system | embedded system human-machine interface |
| Transmission mode | Taiwan precision screw with guide rail |
| Driving mode | stepper servo motor |
| Repeat positioning accuracy | ±0.02mm |
| Dimensions | L: 900mm, W: 900mm, H: 1750mm |
| Power | 4000W |
| Machine weight | 200KG |
| Max bearing weight of Y-axis | 35KG |
| Input power supply | single-phase AC 220V/50Hz AC380V 3 phase |
| Air Source | 0.4-0.6 Mpa |
Single Side Spot Welding Machine Details
