Automatic Numerical Control EV Cell Battery Spot Welding Machine
for 18650 Battery Pack
This
Battery Welding machine is used for 18650 battery pack automatic spot welding, it can weld
both side together with high speed and good effect.
Features :
1. Support breakpoint start, support automatic start and manual
start mode conversion.
2. It has a false spot welding and out of spot welding alarm
function.
3. Programming is simple, and it supports any point programming and
array programming. 999 groups can be saved programming files.
4. Welding needle replacement forecast reminder.
5. Own welding current monitoring system, real-time monitoring of
welding current.
Product Advantages
Full servo welding head, high welding consistency performance,
consistent pressure, automatic compensation function for spot
welding needle wear, poor welding alarm, real-time monitoring,
recording, automatic feedback compensation function of welding
current.
Product Specification
SPECIFICATIONS FOR MD-ASW AND MD-ADW |
| MD-ASW | MD-ADW |
Welding Head Number | 1 | 2 |
Travel | X: 400mm; Y: 400mm | Y: 500mm; Z: 350mm |
Welding Spped | 0.5s/spot, 2000-2500pcs/h | 0.5s/spot, 3500-4000pcs/h |
Welder Power Suppler | 5000A Inverter Spot Welder |
Max Motor Speed | 1000mm/s |
Max Battery Number | 450 pcs (18650) |
Operate System | Embedded system |
User Interface | Touch screen |
Drive Mode | Step motor and precision guide rail |
Power Supply | 220V/50Hz(machine); 3 phase, 380V/50Hz(Welder) |
Air Pressure | 0.3-0.6 MPa |
Machine Size | 900L*900W*1750Hmm | 1100L*900W*1930Hmm |
Machine Weight | 200kg | 350kg |
Product Application
MD-ADW can be used in electric tool battery, torsion car battery,
Energy Storage Battery Pack, Scooter Electric Vehicle Battery, etc.
Compared with manual spot welding, the efficiency and accuracy of
welding have been greatly improved.
Product Operation
1. Setting the parameters of welding on the touch screen. (The same
product only need to be set once)
2. Put the fixture with the battery pack on the quick clamping
position.
3. Press the start button, the machine automatically complete all
welding actions.
4. The welder sound to prompt operator replacement of new fixture
(battery pack).
Double side spot welder details
Cylindrical battery pack welding samples
